ApplicationCompatible with 1000V and 1500V plant architectures
Module TypeShingled mono crystalline PERC
Nominal Power405W to 420W per panel
it's catit's single
Hiring Event in Columbia, South Carolina on April 22nd 4-7pm..
Click HereApplicationCompatible with 1000V and 1500V plant architectures
Module TypeShingled mono crystalline PERC
Nominal Power405W to 420W per panel
Standard
Produces more than 97.5% power in the first year and after 25 years 85.5%.
Standard
2000 hrs damp heat testing is twice the standard testing hrs. required
600 thermal cycling testing is three times the standard cycles required.
192 hrs of PID (potential-induced degradation) at 85°C/85RH) is twice the standard testing hrs. required.
Mechanical Load testing for Dynamic + Thermal Cycle + Humidity Freeze result in much less cell breakage and power loss than static testing alone.
60-100 kWh/m2 LID (light-induced- degradation) validates early hour performance.
LeTID (light and elevated temperature degradation) is a proprietary validation for long term PERC performance.
Validated for use in harsh environment by IEC testing for salt mist, amonia, dust and sand.
Complete this form to get a quote on the equipment you are interested in.