it's catit's single

Rating Prime200 kVA

Frequency50/60 Hz

Voltage220 - 480 V

Fuel/Emissions StrategyEU Stage V

EngineCat® C7.1

FuelDiesel

Width56in

Height93in

Length161in

Weight - With Lube Oil and Coolant8049lb

100% Load 50 Hz11.5gal/hr

100% Load 60 Hz14.3gal/hr

75% Load 50 Hz8.6gal/hr

75% Load 60 Hz10.5gal/hr

Sound Power @ 1 meters (3 feet) @ 75% of rating (50Hz)75.1 dB(A)

Standard

Twin Turbocharged, air-to-air aftercooler

Electronic ECM controlled

Standard

Engine Mounted Clean Emissions Module (CEM)

Diesel Emissions Fluid (DEF)

Standard

LC5114F Frame

Coastal insulation protection

Standard

Digital EMCP4.2B set mounted digital controller

Optional

ComAp InteliGen NTC, Deepsea 7320, Deepsea 8620, DEIF AGC-4

Syncronising capabilities

Standard

High efficiency two stage air cleaner, with dust cup andservice indicator

Standard

Provides package monitoring and management

Standard

Package mounted radiator with vertical air discharge. Filled from factory

High ambient performance

Standard

24V heavy duty charging alternator with integral regulator

Standard

24 hour dual wall fuel tank with internal fuel fill

Engine mounted primary and secondary fuel filter

Standard

Separate robust steel enclosures for control & distribution sections

4 pole, 400A main circuit breaker

Optional

CE socket box with integrated MCB & RCBO protection

Standard

Sound attenuating, galvanised steel enclosure with exceptional noise reduction performance

Sealed quarter-turn compression latches with key orpadlock capabilities

Standard

On engine primary and secondary oil filters. Filled from factory

Standard

Factory tested and inspected

Full manufacturer's warranty

Optional

Inboard mounted 3-way valve for external fuel connection, electronic fuel gauge and Bund Level Sender

Optional

Oil and coolant drains piped to base frame

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.