Join the Blanchard Team..
Apply Now
Producing oil and gas is a complex task that requires equipped designed specifically for the oilfield. Cat C-Series oilfield diesel generator sets offer a rugged design capable of withstanding harsh conditions in the oilfield. Decades of experience in engine manufacturing combined with the latest electronics deliver the highest performance, safe operation, low emissions, and simplified operator interface. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. C32 ACERT oilfield diesel generator set. Ratings: 800 – 910 ekW (1000 – 1300 kVA) @ 50 and 60 Hz (1500 and 1800 rpm) meet U.S. EPA Tier 2 equivalent, EU Stage II equivalent emission standards.
Request a QuoteMaximum Rating800 ekW (1000 kVA)
Minimum Rating910 ekW (1300 kVA)
Emissions/Fuel StrategyU.S. EPA Tier 2
AspirationTurbocharged-Aftercooled
Manifold TypeDry
Bore5.7in
Stroke6.4in
Displacement1959in³
Engine Control and ProtectionADEM A4
Generator Set ControlEMCP 3.1
GeneratorSR4B
Fuel SystemMEUI
Frequency - Speed50/60 Hz (1500/1800 rpm)
FuelDiesel
Length206in
Width75in
Height86in
Weight20500lb
Standard
Dual element air cleaner
Service indicator
Optional
Air inlet adapters
Precleaners
Standard
Radiator package mounted (50° C)
Coolant drain line with valve at edge of base
Coolant level sensor
Fan and belt guards
Coolant level sight gauge
Cat Extended Life Coolant
Metal top and bottom tanks
Standard
Dry exhaust manifold
Flange outlets
Optional
Stainless steel exhaust flex fittings
Elbows, flanges, expanders, and Y adapter
Standard
Primary fuel filter with integral water separator
Secondary fuel filters
Fuel priming pump
Flex fuel lines
Fuel cooler
Standard
SR4B brushless
Self excited
Class H insulation
Form wound
IP23 protection
Cat DVR 3-phase sensing with selectable volts/Hz
3 sensing CTs and one droop CT
Anti-condensation space heater
Optional
Permanent magnet excitation
Oversize and premium generators
Standard
Bus bar - NEMA and IEC mechanicallug holes
Bottom cable entry; capable of top cable entry
Standard
ADEM A4 ECU
EMCP 3 Control Panel
Optional
EMCP 4.2 control panel
EMCP 4.3 control panel
Local or remote annunciator panel
Generator temperature monitoring and protection
Discreet I/O module
Load share module (optional with direct rack)
Standard
High efficiency oil filter
Oil drain valves
Fumes disposal
Gear-type lube oil pump
Deep sump oil pan
Standard
Steel base frame (skidable)
Anti-vibration mounts (shipped loose)
Designed welded base for increased durability (I-beam design)
Standard
24-volt starting motor
45-amp charging alternator
Battery rack
Battery disconnect switch
Oversized batteries
Optional
Jacket water heater with shutoff valves
Battery chargers (10 amp)
Standard
Paint — Caterpillar yellow except rails and radiators (gloss black)
Flywheel and flywheel housing — SAE No. 0
Complete this form to get a quote on the equipment you are interested in.
