Join the Blanchard Team..
Apply Now
The line of G3500 engines brings versatility, uptime, and low operating cost to your gas compression operation. They are equipped with ADEM A3 technology that enables highest performance and safety while maintaining low emissions. Ideal applications for G3500 engines include gas lift, gas gathering, and wellhead gas compression. The Cat G3516J gas engines are rated at 1029 bkW (1380 bhp) @ 1400 rpm and are NSPS site compliant capable with customer-provided air-fuel ratio control and aftertreatment.
Request a QuoteMaximum Rating1380BHP
EmissionsU.S. EPA Spark Ignited Stationary NSPS emissions
Displacement4211in³
Minimum Rating1380BHP
AspirationTurbocharged-2 Stage aftercooled
Oil Change Interval1000 hrs
Stroke7.5in
Bore6.7in
CombustionLean Burn
GovernorElectronic (ADEM A3)
Lube Oil System423 L (112 gal)
Standard
Axial flow air cleaners
Single element canister type with service indicator
Optional
Remote air inlet adapters
Rain Shield
Standard
Two-stage charge air cooling system
Engine cooling and charge air cooling thermostats
Standard
Watercooled exhaust manifolds
Dry Turbocharger housings
Water-cooled exhaust elbow
Optional
Flexible fittings
Elbows
Flange
Mufflers
Standard
SAE No. 00 flywheel housing
SAE standard rotation
SAE No. 21 Flywheel
Standard
7-40 psig gas supply
Electronic fuel metering valve
Gas pressure regulator
Gas shutoff valve
Fuel System
Optional
Fuel filter
Standard
Remote-mounted Advisor control panel
Interconnect harness
Standard
Crankcase breather — top mounted
Oil cooler
Oil filter — RH
Oil pan — shallow
Oil sampling valve
Turbo oil accumulator
Optional
Oil bypass filter
Deep sump oil pan
Air prelube pump
Lubricating oil
Oil pan drain
Standard
Rails
Standard
Electronic shutoff system
Gas shutoff valve
Optional
Explosion relief valves, status control box interconnect wiring harness
Standard
Paint — Cat yellow
Crankshaft vibration damper and guard
Standard
Front lower LH accessory drive
Front housing, two sided
Optional
CSA Alternator (24V, 65A)
Optional
Front stub shaft
Optional
90 psi starter
150 psi starter
Optional
EEC DOI certification
Complete this form to get a quote on the equipment you are interested in.
