it's catit's single

Cat EGP Switchgear

EGP (Emergency Generator Paralleling) switchgear is used for paralleling multiple generators that are not directly connected to a utility source.

Request a Quote

ConfigurationConfigurable PLC based switchgear capable of controlling and monitoring multiple generator sets, tie and load breakers in conjunction with downstream transfer switches for standby or emergency applications

Modes of OperationMulti-unit Island and multi-unit standby mode with optional redundant controls and components.

ApplicationLV and MV (208V - 38 kV)

ANSI Protective Devices15/25, 27/59, 81 O/U, 32, 40, 50, 51

CertificationsIBC, CBC, UBC & OSHPD Certified

Control Panel EnclosureNEMA 1 or NEMA 3R Freestanding Construction

Operating Temperature0°C to 50°C

Storage Temperature-20°C to +60°C

Low Voltage StandardsNEMA SG-5, CSA, ANSI C37.51, ANSI C37.20.1, UL 1558 or UL 891, NFPA 110, NFPA 99 and NFPA 70

Medium Voltage StandardsNEMA SG-5, ANSI / IEEE C37.20.2, CSA-C22.2 No. 31-M89, EEMAC G8-3.2, NFPA 70, NFPA 99 and NFPA 1110

Standard

Choice of 19” Surface Acoustic Wave Color or 15” Resistive Color Touchscreen

Emergency Stop Button for each generator

Instant Auto Switch

Generator Demand Priority Control

Audible Alarm & Horn Silence Button

Circuit Breaker Control Switch with Indicators

Optional

* Accomodates interface with a building management system for monitoring all system parameters via Modbus RTU or TCP

Optional

* Provides additional discrete synchronization protection

Optional

* To monitor breaker status, alarms, metering and other operating parameters

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.