725 Articulated Truck

Engine ModelCat® C9.3

Gross Power (SAE J1995)342hp

Net Power (SAE J1349)334hp

Engine Power (ISO 14396)338hp

Bore4.5in

Stroke45.2in

Displacement567.5in³

Note (1)Advertised power is tested at 1,700 rpm.

Note (2)Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (3)The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.

Note (4)Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.

Note (5)Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards.

Note (6)Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

No Engine De-rating Below3000ft

Peak Engine Torque Gross (SAE J1995)1275lbf·ft

Peak Engine Torque Net (SAE J1349)1263lbf·ft

Peak Engine Torque Speed1200r/min

Rated Payload26.5ton (US)

Heaped (SAE 2:1)19.6yd³

Struck14.4yd³

Tailgate Heaped SAE 2:120.4yd³

Tailgate Struck14.5yd³

Air ConditioningIf equipped with R134a (Global Warming Potential = 1430), the system contains 1.1 kg (2.4 lb) of refrigerant which has a CO 2 equivalent of 1.716 metric tonnes (1.891 tons).

Forward - 15mile/h

Forward - 29.4mile/h

Forward - 314.4mile/h

Forward - 422.1mile/h

Forward - 530.7mile/h

Forward - 636.3mile/h

Reverse - 15.5mile/h

Note (1)The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f

Note (2)Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Front Axle - Empty30974lb

Center Axle - Empty10242lb

Rear Axle - Empty9757lb

Total - Empty50975lb

Front Axle - Rated Load5511lb

Center Axle - Rated Load23699lb

Rear Axle - Rated Load23699lb

Total - Rated Load52910lb

Front Axle - Loaded36484lb

Center Axle - Loaded33944lb

Rear Axle - Loaded33457lb

Total - Loaded103886lb

TypeHigh strength Brinell HB450 wear resistant steel

Front Plate0.28in

Base Plate0.51in

Side Plates0.43in

Scow0.51in

Fuel Tank91gal (US)

Cooling System18gal (US)

Steering/Hoist Hydraulic System24gal (US)

Engine Crankcase8gal (US)

Transmission10gal (US)

Output Transfer Gear Box5gal (US)

Final Drive - Each1.6gal (US)

DEF Tank4gal (US)

Raise Time10s

Lower Time8s

BrakesISO 3450 – 2011

Cab - FOPSISO 3449 - 2005 Level II

Cab - ROPSISO 3471 – 2008

SteeringISO 5010 – 2019

Turning Dimensions - Steer Angle - Left/Right45°

Turning Dimensions - SAE Turning Radius294in

Turning Dimensions - Clearance Radius318in

Turning Dimensions - Inside Radius153in

Turning Dimensions - Aisle Width210in

NoteDimensions are for machines equipped with 23.5R25 tires.

Lock to Lock4.75 seconds @ 60 rpm

Hydraulic Excavators: 349/352 - Passes4-5

Hydraulic Excavators: 336 - Passes5-6

Wheel Loaders: 972/972 XE - Passes3-4

Wheel Loaders: 966/966 XE - Passes4

Wheel Loader: 962 - Passes4-5

Wheel Loader: 950 - Passes5

NoteAn optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 349/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

Air conditioning

Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp

Windows opening both sides, tinted

Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook

Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted

Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt

Tilt and telescopic steering wheel

Retractable belt: Operator seat and second seat

Adjustable air vents

Heater and defroster with four-speed fan

Sun visor

Touchscreen display incorporating the rearview camera video feed

Windshield wiper and washer, two speed, intermittent (front)

Combined gear selection and hoist control lever

Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active

Secondary steering – electro hydraulic

Mirrors: exterior

Optional

Infrared glass – high ambient cab

Mirrors, heated motorized

Radio, Bluetooth^® stereo system

Heated/cooled seat

Four-point seat belt

Window blinds

Windshield wiper and washer, single-speed (rear)

Standard

Product Link Cellular PLE643

Cat^® Detect with Stability Assist

Optional

Machine Security System (MSS)

Cat^® Payload

Product Link Dual PLE683

Standard

Electrical system: 24-volt, 5A 24- to 12-volt converter

Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators

Main disconnect switch

Horn

Batteries (two) maintenance free

Remote starting receptacle (cables not included)

Optional

Cold weather start attachment

Engine block heater

Ether start

Flashing LED beacon

Roof mounted LED work lights

Standard

Differentials: standard with automatic clutched inter- and cross-axle differential locks

Cat Clean Emission Module (CEM) and exhaust aftertreatment package

Cat C9.3 engine

Three axle, six-wheel drive

Hydraulic retarder

Dual circuit oil immersed, enclosed brakes – all wheels

Auto shift six-speed forward and single speed reverse transmission

Standard

Reverse alarm

Rearview camera

Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab

Standard

Front dump body spill guard, integral part of fabricated body

Crankcase

Rear window

Radiator

Standard

Vandalism protection: lockable caps

Mud flaps: wheel arch and body mounted with transportation tiebacks

Sound suppression (standard in some countries*)
–*EFTA countries are EU countries plus Iceland, Norway, Lichtenstein, Switzertland, Türkiye and UK.

S·O·S sampling valves

Tires, six 23.5R25

Optional

Cold weather coolant –51° C (–60° F)

Auto lube installation for automatic greasing of bearings

Bare chassis (no body) standard wheel base

Exhaust heated body

Fuel additive – anti-waxing

Body liners

Fast fuel fill

Wheel chocks

Scissor tailgate