AD45 Underground Articulated Truck

Engine ModelCat® C18

Engine Power - EU Stage V Engine - ISO 14396:2002598HP

Engine Power - Tier 3 Engine - ISO 14396:2002581HP

Engine Power - VR Engine - ISO 14396:2002581HP

Bore5.7in

Stroke7.2in

Displacement1104.53in³

Note (1)Power ratings apply at a rated speed of 2,000 rpm when tested under the reference conditions for the specified standard.

Note (2)All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat

Note (3)Minimal engine derating* required up to 3048 m (10,000 ft) @ rated speed for Stage V engines, 2700 m (8,858 ft) for Tier 3/Stage IIIA equivalent engines and 3505 m (11,500 ft) for Tier 2/Stage II equivalent VR engines.

Note (4)Optional Ventilation Reduction Package available.

Note (5)Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available.

Note (6)Optional engine available that meets U.S. EPA Tier 4 Final and EU Stage V emission standards.

Note (7)*<5 %

Nominal Payload Capacity99208lb

Gross Machine Mass196765lb

Shipping Mass (Stage V Engine Model)96225lb

Shipping Mass (Other Engine Models)94415lb

Body Capacities18.0-25.1 m³ (23.5-32.8 yd³)

Operating Mass91285lb

Operating Mass - Front Axle64565lb

Operating Mass - Rear Axle26720lb

Operating Mass + Rated Payload190495lb

Operating Mass + Rated Payload - Front Axle89235lb

Operating Mass + Rated Payload - Rear Axle101260lb

Operating Mass88320lb

Operating Mass - Front Axle61225lb

Operating Mass - Rear Axle27095lb

Operating Mass + Rated Payload187530lb

Operating Mass + Rated Payload - Front Axle85355lb

Operating Mass + Rated Payload - Rear Axle102175lb

Empty - Front Axle70.7%

Empty - Rear Axle29.3%

Loaded - Front Axle46.8%

Loaded - Rear Axle53.2%

Empty - Front Axle69.3%

Empty - Rear Axle30.7%

Loaded - Front Axle45.5%

Loaded - Rear Axle54.5%

Raise15 Seconds

Lower21 Seconds

Total Cycle Time36 Seconds

Raise14 Seconds

Lower21 Seconds

Total Cycle Time35 Seconds

Dump Body - 123.6yd³

Dump Body - 2 - Standard27.9yd³

Dump Body - 332.8yd³

Ejector Body29.9yd³

NoteHeaped SAE 2:1.

Outside Clearance Radius*371in

Inside Clearance Radius*209in

Frame Oscillation10°

Articulation Angle42.5°

Note*Clearance dimensions are for reference only.

Forward - 14.4mile/h

Forward - 25.9mile/h

Forward - 38mile/h

Forward - 410.8mile/h

Forward - 514.6mile/h

Forward - 619.7mile/h

Forward - 726.4mile/h

Reverse - 14.2mile/h

Reverse - 25.6mile/h

NoteMaximum travel speeds with standard 29.5 × R29 tires.

Engine Crankcase - With Filter16.9gal (US)

Transmission15.9gal (US)

Hydraulic Tank70.3gal (US)

Cooling System22.5gal (US)

Front Differential and Final Drives20.3gal (US)

Rear Differential and Final Drives21.9gal (US)

Fuel Tank201.8gal (US)

Tire Size29.5 × R29

StandardsROPS/FOPS Certified Cab

Differential Ratio3.46:1

Final Drive Ratio5.65:1

Total Reduction Ratio19.55:1

Standard

12V power supply in cab

Alternator, 95-amp

Auxiliary start receptacle

Battery disconnect switch, ground level

Circuit breaker, 80-amp

Corrosive protection spray

Diagnostic connector

Electric starting, 24V

Engine shutdown switch, ground level
– Front left hand side

Lighting
– Headlights with dimmer switch, LED
– Brake and tail lights
– Rear work light (cab mounted), LED
– Reversing lights, LED

Low maintenance batteries

Reversing alarm

Starting and charging system

Standard

Cat Electronic Monitoring System (Cat EMS)

Electric horns

Gauges
– Engine coolant temperature
– Transmission coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Tachometer

Indicator lights
– Alert warning light
– Body up position warning
– High beam
– Residual brake pressure warning
– Retarder application
– Turn signal

Low hydraulic level warning

Open operator station ROPS/FOPS structure

Operator presence system (auto park brake)

Rearview mirrors

Suspension seat Cat Comfort TLV2 with retractable seat belt

Trainer/passenger seat and seat belt

Tilt/telescopic steering wheel

Turn signal indicators

Standard

Cat C18 ATAAC diesel engine, 6-cylinder

Automatic brake retarder control

Auto shift transmission 7 speed forward/2 speed reverse

Control throttle shifting

Engine air intake precleaner

Electric fuel priming pump

Exhaust, turbo compartment shielding

Four wheel drive

Long life coolant

Programmable ground speed limiting

Programmable gear block out with tray up

Radiator cap manual release

Radiator, cross flow

SAFR^™ full hydraulic enclosed wet, multiple-disc brakes, oil cooled

Torque converter, standard with automatic lockup

Standard

Body, dump, (21.3 m³, 27.9 yd³)

Catalytic exhaust purifier/muffler group

Centralized lubrication points

Decals, international picto graphics

Dual fuel tanks

Engine and transmission belly guards

Fenders, front, rear flaps

Fire wall

Fuel system manual shut off tap

Front axle suspension

Frame lifting lugs

Front and rear tow pin

Front rubber bumpers

Gauges, brake pressure

Hand hold (access on/off top deck)

Hitch, articulated and oscillated

Operation and Maintenance Manual – English and other applicable local languages to select

S·O·S port
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil

Swing out radiator grill

Tires and rims: A tire must be selected from the mandatory attachments section of the machine price list. Base machine price includes a standard tubeless rim allowance only.

Optional

Battery shutdown
– Ground level isolation, in cab isolation switch
– Ground level isolation, engine shutdown switch
– Ground level isolation, in cab isolation, engine shutdown switch

Body dump
– Body (18.0 m³, 23.5 yd³)
– Body (25.1 m³, 32.8 yd³)

Body ejector
– Ejector (22.9 m³, 30.0 yd³)

Body liners, impact and/or wear
– 10 mm (0.4"), body, dump (18.0 m³, 23.5 yd³)
– 10 mm (0.4"), body, dump (21.3 m³, 27.9 yd³)
– 10 mm (0.4"), body, dump (25.1 m³, 32.8 yd³)
– 10 mm (0.4"), body, ejector (22.9 m³, 30.0 yd³)

Body wear plate, external
– 16 mm (0.62"), body, dump (18.0 m³, 23.5 yd³)
– 16 mm (0.62"), body, dump (21.3 m³, 27.9 yd³)
– 16 mm (0.62"), body, dump (25.1 m³, 32.8 yd³)

Camera
– Color rear facing
– Color loading

Cover, anti vandalism for shipping

Engine options
– Engine, Stage V
– Engine, Ventilation Reduction (VR)
– Equivalent to Tier 3
– After-treatment options (for use with VR Engine only)

DPF (Flow Through) Filter

Fast fill system
– Coolant
– Engine oil
– Fuel (dual tanks)
– Hydraulic oil
– Transmission oil

Fire suppression system
– Ansul, wet

Fluids
– Arctic fuel
– Arctic coolant

Handrail Extension

Lubrication system
– Automatic, dump or ejector body
– Centralized, ejector body

Mine transfer
– Mine transfer ready front frame (tack welded)
– Mine transfer ready dump body (tack welded)
– Mine transfer ready ejector body (tack welded)

Operators station ROPS/FOPS enclosed
– Air conditioning
– Cab pressurizer and filter
– Dome light
– Heater
– Radio ready compartment for radio and speakers
– Sun visor
– Window, sliding cab door

Park brake switch engagement
– Push to apply
– Pull to apply

Payload
– Truck Payload Measurement System (TPMS)

Reflective tape

Rims
– Rim identification numbering
– Spare, tubeless

Seat
– Suspension seat Cat Comfort TLV2, vinyl
– Suspension seat tee, mechanical

Seat cover
– Tee and Cat Comfort TLV2
– Seat cover, companion

Secondary steering system

Service tools
– Collet jacking bolts, dump or ejector
– Diagnostics box
– Hoist cylinder supports (for body removal)
– Brake wear gauge
– Reference parts manual for additional tooling available

Switches
– Engine shutdown, fire suppression activation
– Idle timer
– Engine shutdown, fire suppression activation/idle timer

Technology
– Product Link Elite (PLE) system

Tire arrangements
– Tire, 29.5 × R29 VSNT Bridgestone
– Tire, 29.5 × R29 VSDL Bridgestone

Torque converter, high altitude, 3000 m (9,842 ft) and up

NOTE: Not all features are available in all regions. See your Cat dealer for more information.