930M Waste Handler Small Wheel Loader

930M Waste Handler Small Wheel Loader

The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Request a Quote

Maximum Gross Power168hp

Bore4in

Stroke5in

Displacement427in³

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)586ft·lbf

Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)160hp

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)588ft·lbf

Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)573ft·lbf

EmissionsThe Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.

Engine ModelCat® C7.1

Note (1)*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (2)Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)572ft·lbf

Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)587ft·lbf

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)166hp

Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)170hp

Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)163hp

Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)164hp

Engine Power - ISO 14396 - Metric170hp

Engine Power - ISO 14396:2002168hp

Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)162hp

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)158hp

Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)156hp

Net Power (Standard Power Mode: Range 1-3*)1600r/min

Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)156hp

Net Power (Performance Power Mode: Range 1-4)1800r/min

Note (3)No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)168hp

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)1800r/min

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)601ft·lbf

Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)1600r/min

Operating Weight37713lb

Note (2)^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

Note (1)**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

Operating Weight (1)15 381 kg (33,908 lb)**

Operating Weight (2)17 107 kg (37,713 lb)^

Bucket Capacities3.0-5.0 m3 (3.9-6.5 yd3)

ROPSISO 3471:2008

FOPSISO 3449:2005 LEVEL II

Note (1)* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows cl

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*68dB(A)

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*101dB(A)

Note (2)^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.

Note (1)**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.

Full Turn Tip Load (2)9525 kg (20,998 lb)^

Full Turn Tip Load (1)8573 kg (18,900 lb)**

Air ConditioningThe air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Maximum Flow - Implement Pump50gal/min

Maximum Working Pressure - Implement Pump3771psi

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)5.1/5.7 seconds

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure4061psi

Relief Pressure - Tilt Cylinder4061psi

Note (1)Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)1.5/1.7 seconds

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)2.7/2.7 seconds

Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Maximum Flow - Implement Pump - 4th Function Maximum Flow*42gal/min

Note (3)* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure4061psi

Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time9.3/10.1 seconds

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*50gal/min

Lift Cylinder: Standard Lift Linkage - Stroke28.7in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter5.9in

Lift Cylinder: Standard Lift Linkage - Bore Diameter4.7in

Lift Cylinder: Standard Lift Linkage - Rod Diameter2.6in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter3.5in

Tilt Cylinder: Standard Lift Linkage - Stroke21.9in

Steering Cylinder, Double Acting - Bore Diameter2.8in

Steering Cylinder, Double Acting - Rod Diameter1.6in

Maximum Steering Torque - 0° (Straight Machine)37155ft·lbf

Steering Cylinder, Double Acting - Stroke17.2in

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed2.4s

Maximum Working Pressure - Steering Pump3500psi

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited2.8s

Maximum Steering Torque - 40° (Full Turn)27747ft·lbf

Note (1)Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Note (2)Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Maximum Flow - Steering Pump34gal/min

Forward and Reverse - Range 425mile/h

Forward and Reverse - Range 317mile/h

Forward and Reverse - Range 28mile/h

Note*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).

Forward and Reverse - Range 1*1-13 km/h (0.6-8 mph)

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65± 10.5 degrees

Note (3)Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.

Note (2)Offset rims available to meet European roading requirements.

Rear AxleOscillating

Front AxleFixed

Brakes - ParkingSpring applied hydraulically released

Note (1)Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Front Axle - Traction AidLocking differential

Rear Axle - Traction Aid - OptionalLimited slip differential

Brakes - ServiceInboard wet disc

Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder± 7 degrees

Cooling System7.9gal (US)

Engine Crankcase5.3gal (US)

Axles - Rear6.6gal (US)

Hydraulic Tank23.8gal (US)

Transmission - Gear Box2.2gal (US)

Fuel Tank51.5gal (US)

Diesel Exhaust Fluid (DEF) Tank5gal (US)

Hydraulic System - Including Tank43.6gal (US)

Axles - Front6.9gal (US)

Recyclability94%

Standard

Axle Duo-Cone seal guards

Auto idle shut down feature

Cat C7.1 engine
– Power modes (Standard and Performance)
– Power by range (High Power in Range 4)
– Turbocharged and aftercooled
– Diesel particulate filter (Fit for Life)

Coded start (requires secondary display)

Differential lock in front axle

Enclosed wet disc full hydraulic brakes

Hydraulically driven demand cooling fan

Hydrostatic transmission with electronic control
– Operator modes (Default, TC, Hystat, and Ice)
– Directional Shift Aggressiveness (fast, medium, slow)
– Rimpull control, adjust wheel torque
– Creeper control, adjust ground speed

Parking brake, electric

Single plane cooling package wide six fins per inch density

Oil sampling ports

Throttle lock and max speed limiter

Standard

Automatic lift lower and tilt kickouts, adjustable in-cab

Bucket and fork modes, adjustable in-cab

Cylinder damping at kickout and mechanical end stops

Fine mode control (fast, medium, slow)

Hydraulic response setting (fast, medium, slow)

Load sensing hydraulics and steering

Seat-mounted hydraulic joystick controls

Standard

Alternator, 115 amp, heavy duty

Batteries, 1,000 CCA (2) 24V system, disconnect switch

Back-up alarm

Emergency shutdown switch

Halogen work and roading lights, LED rear tail lights

Product Link PRO with three year subscription

Remote jump start post

Resettable main and critical function breakers

Standard

75 mm (3 in) High-Vis retractable seat belt, with audible alarm and indicator

Automatic temperature control

Cab, pressurized

Camera, rearview

External heated mirrors with lower parabolic

Ground level cab door release

Hydraulic control lockout

Mirror, single

Lunch box storage

Radio ready speakers

Rear window defrost, electric

Column mounted multi function control – lights, wipers, turn signal

Tilt and telescopic steering wheel

Tinted front glass

Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal

Suspension seat, fabric

Standard

Large-access enclosure doors with adjustable close/open force

Cat optimized Z-bar linkage with parallel lift

Recovery hitch, with pin

Remote mounted lubrication points

Lockable compartments and enclosures

Optional

Autolube, integrated in secondary display

Auxiliary flow, third and fourth function

Differential, limited slip, rear

Beacon light, strobe

Cab, deluxe (standard in Europe)
– Camera, rearview integrated into advanced display
– Electrically adjustable external heated mirrors (2)
– Secondary display to enable features and adjust parameters
– LED interior lighting
– Sunscreen, front and rear
– Touchscreen secondary display
– Ride control adjustable speed activation
– Preventative maintenance reminders
– Integrated help function (26 languages)

Camera, roof mounted, front view with separate display

Cold start package
– Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)

Counterweight, additional options

Coupler, (Fusion and ISO 23727)

Debris packages (low, medium, high)

Fenders (extended cover and full coverage)

Guarding packages

Linkage, high lift

Lights, auxiliary, halogen or LED with engine and DEF compartment lights

Payload Technology
– Cat Production Measurement (CPM)
– CPM Printer

Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping

Radio packages

Rear Object Detection

Ride Control System, adjustable through secondary display

Seats
– Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
– Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.

Steering
– Dual mode and secondary

Tire Pressure Monitoring (TPM)

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.