Join the Blanchard Team..
Apply Now
The Cat® C1.1 Industrial Diesel Engine is offered in ratings ranging from 14.4-18.4 bkW (19.3-24.7 bhp) @ 1800-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 13.7-21.0 bkW (18.4-28.2 bhp) @ 2200-3000 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Nonroad engines less than 19 kW (25 hp) are not currently subject to EU emission standards. Industries and applications powered by C1.1 engines include: Aircraft Ground Support, Auxiliary Power Units, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Construction, Forestry, General Industrial, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Light Towers, Pumps, Trenchers, Underground Mining Equipment.
Request a QuoteMaximum Power24HP
Maximum Torque63lb-ft @ 1600 rpm
Rated Speed2800 rpm
Minimum Power19.3HP
EmissionsU.S. EPA Tier 4 Final, EU Stage V
Engine ConfigurationIn-Line 3
Bore3in
Stroke3.2in
Displacement69in³
Compression Ratio23.0:1
AspirationNaturally Aspirated (NA)/Turbocharged (T)
Combustion SystemIndirect Injection
Rotation from Flywheel EndCounterclockwise
Aftertreatment-
Length19.3in
Width15.8in
Height22.7in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments211lb
Standard
Inlet manifold with choice of inlets.
Standard
Alternator 12 volt 65 amp
Starter motor 12 volt
Glow plug starting aid
Standard
Belt-driven coolant pump
Coolant temperature switch
Standard
SAE No. 6 1/2 flywheel
Choice of SAE No. 5 or standard backplate flywheel housing
U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
Standard
Fuel injection pump
Spin-on fuel filter
Standard
Low profile oil pan
Spin-on lube oil filter
Lube oil pressure switch
Standard
Provision for Power Take Off (PTO)
Standard
Cast iron, engine block
Cast iron exhaust manifold--side outlet
Cold start capability to -20° C (-4° F)
Paint: Caterpillar yellow, with optional colors available at request
Complete this form to get a quote on the equipment you are interested in.
