it's catit's single

Cat®3054C Industrial Diesel Engine

Cat®3054C Industrial Diesel Engine

Cat® 3054C Industrial Diesel Engines offer the perfect balance of durability, fuel efficiency and low emissions. Extensively tested on the job, these engines use a range of mechanical fuel systems and advanced control systems to deliver maximum uptime in the harshest environment. They have proven they can handle the toughest applications and deliver superior performance that exceeds the expectations of the most demanding users. Industries and applications powered by 3054C engines include: Agriculture, Aerial Lifts, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Feller Bunchers, Forestry, Forklifts, General Industrial, Harvesters, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Mobile Sweepers, Paving Equipment, Pumps, Skidders, Specialty Ag Equipment, Sprayers, Trenchers, Turf and Landscaping and Underground Mining Equipment. 3054C engines, with ratings: 52-97 bkW (69.7-130 bhp) @ 2000-2400 rpm, meet U.S. EPA Tier 2 equivalent and EU Stage II equivalent emission standards and are available for non-regulated areas.

Request a Quote

Maximum Power130HP

Maximum Torque369lb-ft @ 1400 rpm

Rated Speed2200-2400 rpm

Minimum Power69.7HP

EmissionsU.S. EPA Tier 2 Equivalent, EU Stage II Equivalent

Length26.1in

Width24.4in

Height31.9in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments674.6lb

Engine ConfigurationInline 4, 4-Stroke-Cycle Diesel

Bore4.1in

Stroke5in

Displacement269in³

Compression Ratio16.2:1

AspirationNaturally Aspirated (NA), Turbocharged (T) or Turbocharged Aftercooled (TA)

Combustion SystemDirect Injection

Rotation from Flywheel EndCounterclockwise

Aftertreatment-

Standard

Inlet manifold with choice of inlets.

Standard

Alternator

Starter motor

Control Panel

Glow plug starting aid

Standard

Top tank temperature 108° C (226° F) as standard to minimize cooling pack size

50:50 water glycol mix

Standard

SAE No. 3 flywheel housing

Flywheel and starter rings

Standard

Fuel filter positions

Standard

Lubricating oil filters and breathers

Oil filter positions

Lube oil sump

Standard

SAE B Power Take Off (PTO)

Standard

Timing case and gear-driven auxiliaries

Belt-driven auxiliaries

Engine mountings

Gauges

Displays

Power and torque curve tailoring

Paint: Caterpillar yellow, with optional colors available at request

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.