it's catit's single

Cat C32 Auxiliary / Diesel Electric Propulsion (US EPA Tier 3 / IMO II)

Cat C32 Auxiliary / Diesel Electric Propulsion (US EPA Tier 3 / IMO II)

Request a Quote

Minimum Rating314BHP

Maximum Rating1333BHP

AspirationTurbocharged-aftercooled aspiration

EmissionsU.S. EPA Tier 3 / IMO II emissions certified

Displacement1959in³

Bore5.71in

Stroke6.38in

RotationCounterclockwise from flywheel end

ConfigurationVee 12, 4-stroke-cycle diesel

Oil Change Interval750 hrs

Flywheel HousingSAE No. 0 with SAE No. 18 flywheel (136 teeth)

Refill CapacityLube Oil System w/Oil filter change: 146 L (38.5 gal)

GovernorElectronic (A4 ECM)

Rated Engine Speed1800 rpm

CoolingHeat exchanger or keel cooled

Minimum Length83.9in

Maximum Width57.3in

Minimum Engine Dry Weight6950lb

Minimum Width57.1in

Minimum Height59.3in

Maximum Length89.8in

Maximum Engine Dry Weight7160lb

Maximum Height63.5in

Standard

Separate circuit aftercooled (SCAC)

Optional

Closed crankcase fumes disposal

Standard

24V control system

Standard

Heat exchanger or Keel Cooling

Watercooled exhaust manifold and turbocharger

Hard seawater lines – no flexible hoses

Flanges for cooling connections, ANSI or DIN

Standard

Duplex fuel filters with hybrid fuel lines

Fuel transfer and priming pump

Optional

Primary fuel filter with water separator, fuel cooler

Standard

Oil fill, simplex filter and dipstick

Deep or shallow sump oil pan

Optional

Duplex oil filters

Standard

Adjustable front support mounting system

Standard

Right or left hand service sides

Customer wiring and service tool connector

Optional

MECP I control panel

MGCP II or MGCP IIIB control panel with Cat® Alarm and Protection System

Optional

Charging alternator

Optional

Front drives including stub shaft and pump drive

Rear SAE A or B pump drives

Optional

Starting motors – air, electric or dual

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.