Join the Blanchard Team..
Apply Now
Cat 3500 offshore generator sets are specifically designed for drilling and production operations offshore. Decades of experience powering offshore vessels and platforms make have evolved into a product that offers proven performance, low emissions, high durability, and low owning and operating costs. Cat generator sets are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat 3516C (HD) offshore generator set. Ratings: 2100 ekW (2963 bhp) @ 60 Hz (1800 rpm).
Request a QuoteMinimum Rating2625kV·A
Maximum Rating2625kV·A
EmissionsEPA Tier 2, IMO Tier II
Engine ControlADEM A4
Bore6.7in
Weight38581lb
Displacement4760in³
Fuel SystemEUI
Stroke8.5in
AspirationDual Turbocharged-Aftercooled
Length264in
Height100in
Width78in
Lube Oil System - Refill107gal (US)
Cooling System - Engine62gal (US)
Standard
Aftercooler core, corrosion resistant (air side)
Air cleaner, regular duty with service indicators
Dual turbochargers, rear mounted
Standard
Dual Caterpillar A4 electronic engine control with electronic unit injector fuel system and rigid wiring harness.
24 VDC (less than 10A) to be provided by customer at Power Distribution Panel to power engine electrical system.
Standard
Jacket water (JW) engine cooling and two-stage jacket water/separate circuit (SCAC) charge air cooling
To ensure compliance in use, radiators or heat exchangers must be capable of rejecting sufficient heat to allow proper engine operation at worst site conditions.
The radiator or heat exchanger must supply 48C (118 F)
SCAC cooling water to the aftercooler inlet of at least 200 gal/min at ambient temperature of 30C and at site conditions (including altitude considerations)
Standard
Dry gas-tight exhaust manifolds with heat shields, dual turbochargers with water-cooled bearings and heat shields.
Exhaust outlet: 305 mm (12 in) round flanged outlet, vertical orientation
Standard
Flywheel, SAE No. 00, 183 teeth Flywheel housing, SAE No. 00
Flywheel housing, SAE No. 00
SAE standard rotation
Standard
Duplex Fuel filter, LH service. Simplex fuel filter, RH service
Fuel transfer pump
Fuel priming pump, RH
Electronically Controlled Unit Injectors
Customer connection located at lower right front of engine
SOLAS shielding
Standard
Engine mounted instrument panel with four position switch, over speed shutdown notification light, emergency stop notification light, graphical display unit for analog or digital display of: oil and fuel pressure, oil and fuel filter differential, system DC voltage, exhaust and water temperature, air inlet restriction, service meter, engine speed, fuel consumption (total and instantaneous)
Standard
Top mounted crankcase breather, RH oil filter, RH oil filler, gear type oil pump, deep sump oil pan, recommended use of Caterpillar Diesel Engine Oil 10W30 or 15W40
Standard
Mounting rails and isolation system based on customer request
Standard
MCS certified Class I / Divison 2
Low Smoke Zero Halogen Wiring Harness
Standard
A-III Electronic Monitoring System provides customer programmable engine de-ration strategies to protect against adverse operating conditions
Emergency stop push button (located in Electronic Instrument Panel) Safety shutoff protection for oil pressure and water temperature, over speed protection
Standard
Only electrical system is hazardous environment certified
NEC 500 Class I Division 2 for gas groups C and D
Temperature class is T3 for ambient temperatures from -10 C to 50 C
Class I/ Division 2 CMPD
Standard
Class I / Division 2 designed to customer's specifications
Insulation for harsh environment protection
Complete this form to get a quote on the equipment you are interested in.
