Join the Blanchard Team..
Apply Now
Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat C18 ACERT™ Industrial Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.
Request a QuoteMaximum Rating800BHP
EmissionsU.S. EPA Non-road Tier 4 Final
Displacement1104in³
Minimum Rating755BHP
Bore5.7in
Stroke7.2in
Rated Speed1800r/min
AspirationTurbocharged-Aftercooled
Governor and ProtectionADEM A4
Engine Weight - Net Dry3482lb
Oil Change Interval250 - 500
Rotation from Flywheel EndCounterclockwise
Flywheel and Flywheel HousingSAE No. 0 or SAE No. 1
Flywheel Teeth136 (SAE 0), 113 (SAE 1)
Minimum Cooling System - Engine Only7.1gal (US)
Length60.2in
Width37.8in
Height50.5in
Standard
Turbocharged Aftercooled
Standard
Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control
Standard
Vertical outlet thermostat housing, centrifugal water pump
Standard
Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)
Standard
SAE 0 and SAE 1 flywheel housing
Standard
MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming
Standard
Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)
Standard
SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications
Standard
Paint: Cat yellow; vibration damper; lifting eyes
Complete this form to get a quote on the equipment you are interested in.
