Join the Blanchard Team..
Apply Now
Cat C27 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C27 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling applications such as mud pump drives. Cat C27 ACERT™ Industrial Diesel Engine. Ratings: 597-858 bkW (800-1150 bhp) @ 1800-2100 rpm meet U.S. EPA Tier 2 equivalent emission standards.
Request a QuoteMaximum Rating1150BHP
EmissionsU.S. EPA Non-road Tier 2
Displacement1658in³
Minimum Rating800BHP
Bore5.4in
Stroke6in
Rated Speed2100r/min
AspirationTurbocharged-Aftercooled
Governor and ProtectionADEM A3
Engine Weight - Net Dry6382lb
Oil Change Interval250
Rotation from Flywheel EndCounterclockwise
Flywheel and Flywheel HousingSAE No. 0 or SAE No. 1
Flywheel Teeth136 (SAE 0), 113 (SAE 1)
Minimum Cooling System - Engine Only14.5gal (US)
Length75.5in
Width57.6in
Height52in
Standard
Dual turbochargers side or rear mounted — inlet 152.4 mm (6 in.) hose connection
Optional
Air lines
Air cleaners
Precleaners
Standard
Electronic governing, PTO speed control
Programmable ratings
Cold mode start strategy
Automatic altitude compensation
Power compensation for fuel temperature
Programmable low and high idle and TEL
Electronic diagnostics and fault logging
Engine monitoring and protection system (speed, temperature, pressure)
J1939 Broadcast (diagnostic, engine status, and control)
Standard
Thermostats and housing — outlet LH vertical orientation
Jacket water pump — gear-driven, centrifugal RH
Optional
Blower fans
Suction fans
Radiators
Standard
Exhaust manifold — dry, heat shields
Dual turbo — rear turbo exhaust, full marmon connection 127 mm (5 in.), maximum load 10 kg for direct
Water-cooled center sections
Optional
Muffler
Standard
SAE No. 0 or SAE No. 1
SAE standard rotation
Standard
MEUI system
Fuel filter, RH ( 2 micron high performance)
Fuel transfer pump
Fuel priming pump (optional electric priming pump)
Standard
Crankcase breather — rear mounted
Oil cooler — RH
Side turbo — oil filler in RH front gear case
Rear turbo — oil filler in RH valve cover
Oil level gauge — RH
Oil filter — RH
Oil pan rear sump
Optional
Lubricating oil
Oil pan
Oil filter
Standard
Front support — narrow
Optional
Engine supports
Standard
Crankshaft pulley — 203.2 mm (8 in), 5 grooves 15.9 mm (.63 in) wide; 292.1 mm (11.5 in.) 1 groove 15.9 mm (.63 in.) wide
Optional
Hydraulic pump drives
Pulley
Auxiliary drive
Standard
Vibration damper
Paint — Cat yellow
Lifting eyes
Automatic variable timing, electronic
Electronic installation kit 70-pin connector (connectors, pins, sockets)
Optional
Battery chargers
Charging alternators
Alternator mountings
Optional
Circuit breaker mounting
Optional
Electric fuel priming pump
Optional
Gauges and instrument panels
Optional
Electric starting motor
Battery sets - 24V
Battery cable
Battery rack
Starting aids
Optional
Overseas preservation
Storage preservation
Export packaging
Complete this form to get a quote on the equipment you are interested in.
