it's catit's single

395 Excavator

The Cat 395 gets every job done every time. A 10% higher digging force eases bucket penetration to reduce digging cycle time in the most demanding applications. With up to a 15% higher payload and the ability to carry the SD6.5m3 bucket, this mass excavator can load a 70-ton off-road truck in 5-6 passes. For deep trenching work, the 395 digs down deep with maximum digging depths from 7190mm (23’7” ft) up to 11 710 (38’5” ft). The 395 is built for extreme durability with 2x reinforced booms, sticks, upper and lower frames. Reduced hydraulic oil capacity, improved filters with longer service intervals, and an integrated auto-lube-ready system save you up to 20% in maintenance costs. Equipped with the latest technology and data, the 395 helps you make informed and smart decisions to improve efficiency, increase productivity, and enhance safety.

Request a Quote

Net Power - ISO 9249542HP

Net Power - ISO 9249 (DIN)550hp (metric)

Engine ModelCat C18

Engine Power - ISO 14396543HP

Engine Power - ISO 14396 (DIN)551hp (metric)

Bore6in

Stroke7in

Displacement1105in³

Biodiesel CapabilityB20¹

EmissionsMeets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.

Note (1)Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of m

Note (2)¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO

Operating Weight207400lb

Note (1)Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14'5") stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35") double grouser shoes and counterweight with removal device.

Maximum Digging Depth31.9ft

BoomGP 8.4m (25'7")

StickR4.4m (14'5")

BucketSD 5.2m³ (6.8 yd³)

Maximum Reach at Ground Level48.3ft

Maximum Cutting Height44.5ft

Maximum Loading Height30.4ft

Minimum Loading Height9.11ft

Maximum Depth Cut for 2440 mm (8 ft) Level Bottom31.4ft

Maximum Vertical Wall Digging Depth22.3ft

Bucket Digging Force - ISO86100ft·lbf

Stick Digging Force - ISO68540ft·lbf

Main System - Maximum Flow - Implement281gal/min

Maximum Pressure - Equipment5366psi

Maximum Pressure - Travel5076psi

Maximum Pressure - Swing4496psi

Swing Speed6.26r/min

Maximum Swing Torque267333ft·lbf

Fuel Tank Capacity322gal (US)

Cooling System19gal (US)

Engine Oil18gal (US)

Swing Drive6gal (US)

Final Drive - Each5gal (US)

Hydraulic System - Including Tank196gal (US)

Hydraulic Tank98gal (US)

DEF Tank21gal (US)

BoomGP 8.4m (25'7")

StickR4.4m (14'5")

BucketSD 5.2m³ (6.8 yd³)

Shipping Height - Top of Cab12ft

Handrail Height12.4ft

Shipping Length49.6ft

Tail Swing Radius15.11ft

Counterweight Clearance5.5ft

Ground Clearance2.9ft

Track Length20.1ft

Track Length to Center of Rollers16.1ft

Track Gauge11.6ft

Transport Width12.9ft

NoteTrack gauge undercarriage extended with 900 mm (35") shoes; transport width undercarriage retracted with 900 mm (35") shoes and no steps

Recyclability98%

Air ConditioningThe air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons).

Standard

Standard and optional equipment may vary. Consult your Cat dealer for details.

Optional

Standard and optional equipment may vary. Consult your Cat dealer for details.

Standard

High-resolution 254 mm (10") LCD touch screen monitor

Heated seat with air-adjustable suspension (Deluxe only)

Heated and cooled seat with auto adjustable suspension (Premium only)

Sound suppressed cab with viscous mounts

Automatic bi-level air conditioner

Jog dial and shortcut keys for monitor control

Keyless push-to-start engine control

Height-adjustable console, infinite with no tool

Tilt-up left-side console

51 mm (2") orange seat belt

Bluetooth integrated radio (including USB, aux port and microphone)

2 x 12V DC outlets

Cup and storage compartments

Openable two-piece front window (Deluxe standard)

Upper radial wiper with washer (Deluxe cab only)

Parallel wiper with washer (Premium only)

Openable polycarbonate skylight hatch (Deluxe standard)

LED dome light

Floor welcome light

Roller front sunscreen

Roller rear sunscreen (Premium standard)

Rear window emergency exit

Washable floor mat

Beacon Ready

Optional

Cat Stick Steer

Auxiliary relay

Additional high-resolution LCD touch screen monitor for Cat Grade Advanced 2D and 3D

Roller rear sunscreen (Deluxe)

Radial lower wiper

Joystick with horizontal sliders

LH/RH electrical pedal for tool control

Dual exit rear window kit

Front windshield laminated glass (P5A glass, EU demolition regulation)

Cab/Operator Protective Guards (OPG) (not compatible with cab light cover, rain protector)

Mesh guard full front (not compatible with cab light, cover, rain protector)

Mesh guard lower half front

Rain protector for front windshield plus cab light cover

Standard

VisionLink

Remote Flash

Remote Troubleshoot

Operator Coaching

Compatibility with radios and base stations from Trimble, Topcon, and Leica

Capability to install 3D grade systems from Trimble, Topcon, and Leica

Cat Grade 2D

Cat Assist (Grade, Boom, Bucket, Swing, Lift)

Cat Payload (Static Weigh, Semiautomatic Calibration, Payload/Cycle Information, USB Reporting Capability)

Work tool recognition (Requires PL161 attachment locator on work tool and Bluetooth receiver on machine)

Work tool tracking (Requires PL161 attachment locator on work tool and Bluetooth receiver on machine)

Optional

VisionLink Productivity

Cat Grade Connectivity

Cat Grade 2D with Attachment Ready Option (ARO)

Cat Grade 3D single GNSS

Cat Grade dual GNSS

GNSS antennae

Laser catcher

Cat Tilt Rotator (TRS) Integration

Standard

Maintenance-free 1,400 CCA batteries (x2)

Centralized electrical disconnect switch

Chassis light

Exterior lights (integrated into storage box)

Optional

1,800 lumen LED premium surround lights

LED boom and cab lights

Standard

Three selectable modes: Power, Smart, and Eco

Auto engine speed control

Up to 4500m (14,760 ft) altitude capability

52°C (126°F) high-ambient cooling capacity

-18°C (-0.4°F) cold start capability

Hydraulic reverse fan

Double element air filter with integrated pre-cleaner

3 vertical side-by-side cooling system

Remote disable

95 Amp alternator

Optional

-32°C (-25°F) cold start capability

Cold start block heaters

Standard

Boom and stick regeneration circuit

Electronic main control valve

Dedicated closed loop swing circuit

Anti-reaction valve

Auto hydraulic oil warmup

Auto swing parking brake

High performance hydraulic return filter

Two speed travel

Bio hydraulic oil capability

Optional

Hydraulic efficiency monitoring

Advanced tool control

Medium-pressure auxiliary circuit

Quick coupler circuit

Smart Boom

Standard

Caterpillar One Key security system

Lockable fuel drain compartment

Lockable external tool / storage box

Lockable door, fuel, and hydraulic tank locks

Lockable disconnect switch

Service platform with anti-skid plate & recessed bolts

Right hand handrail and hand hold (ISO 2867:2011 compliant)

Visibility mirror package

Signaling/warning horn

Ground-level secondary engine shutoff switch

Rearview and right-hand-sideview cameras

Walkway

Travel alarm

2D E-Fence (E-ceiling, E-floor, E-swing, E-wall, E-cab avoidance)

Optional

Cat Command remote control

Swing alarm

360° visibility

Boom lowering check valve

Stick lowering check valve

Inspection lighting

Cat Detect people detection

Swing alarm

360° visibility

Boom lowering check valve

Stick lowering check valve

Inspection lighting

Tilt-up walkway

Bluetooth key fob

76mm (3") retractable seat belt

Standard

Integrated vehicle health management system

Auto lube ready

Grouped location of engine oil & fuel filters

Scheduled Oil Sampling (S·O·S) ports

QuickEvac maintenance ready

Reversing cooling fan

Optional

Electric refueling pump with auto shutoff

Fast-fill fuel system

QuickEvac maintenance ready

Standard

Long variable gauge undercarriage

Swivel guard

Grease lubricated track

Standard counterweight

HD bottom guard

HD travel motor guard

Long variable gauge

Standard counterweight

Towing eye on base frame

Optional

Counterweight with removal device

650mm (26") HD double grouser track shoes

750mm (30") HD double grouser track shoes

900mm (35") HD double grouser track shoes

Three-piece segmented track guiding guards

Two-piece segmented track guiding guards

Optional

7.25 m (23'9") Mass boom

5.5 m (18'1") HD Reach stick

8.4 m (27'7") GP boom

10 m (32'10") Reach boom

2.92 m (9'7") Mass stick

2.92 m (9'7") GP stick

3.4 m (11'2") Mass stick

3.4 m (11'2") GP stick

3.7 m (12'2") GP stick

4.4 m (14'5") HD Reach stick

Bucket linkage, HB2 type without lifting eye, Autolube ready

Bucket linkage, HB2 type without lifting eye, Autolube ready

Bucket linkage, JC type with lifting eye, Autolube ready

Bucket linkage, JC type without lifting eye, Autolube ready

View used options

See Available Used options

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.