3412C | 800 kVA 50Hz Generator Set

3412C | 800 kVA 50Hz Generator Set

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Request a Quote

Maximum Rating680 kVA

Minimum Rating680 kVA

Emissions/Fuel StrategyLow Fuel Consumption

Voltage380 to 415 Volts

Frequency50 Hz

Speed1500 rpm

Duty CycleStandby, Prime

Engine Model3412C TA, V-12, 4-Stroke Water-Cooled Diesel

Bore5.4in

Stroke6in

Displacement1648.86in³

Compression Ratio13:01

AspirationTurbocharged, Air to Air Aftercooled

Fuel SystemPump and Lines

Governor TypeADEM™ A5

Length - Maximum162.4in

Width - Minimum75in

Width - Maximum78.3in

Height - Maximum75in

Dry Weight - Genset (minimum)12039lb

Dry Weight - Genset (maximum)13030lb

Standard

Air cleaner, single element canister type with service indicator

Optional

Heavy duty air cleaners

Open element air cleaners

Dual element air cleaners

Standard

GCCP Control panel

DC volts

Environmental sealed front face

kVA (per phase, average & percent)

Voltage adjust

Compatible with the following optional modules:

Low coolant level

RPM

Engine cycle crank

Over/under frequency (81 o/u)

Programmable protective relaying functions:

kVAr (per phase, average & percent)

coolant temperature

Local annunciator

Reverse reactive power (kVAr) (32RV)

2 Programmable digital outputs

Emergency stop

Amps (per phase & average)

Volts (L-L & L-N)

Failure to start (overcrank)

Speed adjust

24 Volt DC operation

Remote Serial annunciator

kW (per phase, average & percent)

Low coolant temperature

High coolant temperature

Over/under voltage (27 / 59)

Reverse power (kW) (32)

Run/auto/ stop/control

Operating hours

Customer data link (Modbus RTU)

Power factor (per phase & average)

Generator temperature monitoring module

6 programmable digital inputs

Overspeed

Text alarm/event descriptions

4 programmable relay outputs (Form A)

kW-hr (total)

Features include:

Remote CAN annunciator

Digital I/O module

Generator phase sequence

Low oil pressure

Warning/shutdown with common LED indication of shutdowns for:

Accessory module data link

Emergency stop pushbutton

Serial annunciator module data link

Frequency (Hz)

2 Programmable relay outputs (Form C)

Oil pressure (psi, kPa or bar)

Digital indication for:

Communications

Overcurrent (50 / 51)

Optional

GCCP Control panel

Vandal proof panel door

Remote custom annunicator

Ground fault relay

Common alarm/shutdown relay

Generator running VFC

GCCP Control panel

Local discrete I/O package

First local annunicators

Generator temperature monitoring package

Standard

Caterpillar extended life coolant

Coolant level shutdown

Radiator with guard (Sized for 50 degrees C)

Fan and belt guards

Coolant drain line with valve, piped to edge of base

Optional

Jacket water heaters

Radiator duct flange

Standard

Stainless steel exhaust flex with ANSI style outlet flange, gasket, bolts and mating weld flange, shipped loose

Optional

Through wall installation kit

Manifold and turbocharger guards

Elbow kit

Mufflers

Standard

Water seperator

Flexible fuel lines terminated on base

Primary and Secondary fuel filters

Fuel priming pump

Standard

Class H insulation

2:1 Volts/Hz

3-phase sensing

Class F temperature rise

12 Leads

VR6 voltage regulator

Busbar termination

Reactive droop

SR4B self excited

Optional

Digital voltage regulator

Oversize and premium generators

Permanent magnet excitation (PMG)

Space heater

Standard

Cat electronic governor

Optional

Electronic load share

Standard

Lubricating oil

Oil drain line with valve, piped to edge of base

Fumes disposal, piped to front of radiator

Oil filter

Optional

Manual sump pump

Standard

Base, formed steel with linear vibration isolators between base and engine-generator

Optional

Fuel tank base (1200 ltr)

Standard

45 amp Charging alternator

Fuel shutoff solenoid

Battery with rack, cables

24 volt starting motor

Optional

1600 Amp, 3 pole, Non-UL, 100% rated, 24 volt DC shunt trip

1250, 1600 Amp, 3 pole, IEC 100% rated, 24 volt DC shunt trip

Optional

Eurasian Conformity (EAC) mark

Optional

PGS Test report @ 0.8 power factor

PGS Test report @ 1.0 power factor

Optional

Battery disconnect switch

Oversize batteries

Battery chargers

Heavy duty starting system

CONTACT US

REQUEST A QUOTE

Complete this form to get a quote on the equipment you are interested in.

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    What You Get: A phone call from a rep or agent. A cost estimate for your machine or the project. An in-person consultation if necessary.